vapesourcing

Are you looking for some cheap yet reliable AIO vape kits for MTL vaping? If so, you may like the two Aspire devices I'm gonna introduce in the following.

Firstly is the Aspire Breeze 2 Kit that is the upgraded rendition to the original Breeze AIO. Its compact size and sleek metallic look will make you fall in love, but the satisfying power and functionality will keep you vaping discreetly. Operated by a single button, the simple firing mechanism makes the Aspire Breeze 2 a great device for novices but can be enjoyed by even the most seasoned of vapers. Powering the kit is a built-in 1000mAh battery, this allows the device to easily last for an entire day and you won't be reaching for the charging cable midday too often.

As for the improved pod, it can hold up to 3ml of e-juice and adopts an easy bottom filling design. Heating elements included in the set are a 1.0ohm U-tech coil head and a spare 0.6ohm U-tech coil head. Coil installation is easy, just pull and remove the drip tip, unscrew and pull out the airflow component. Then detach the coil from the airflow control ring and replace it with a new one. Screw the airflow component back to the pod system and replace the drip tip section. Adjusting the airflow is simple too, just pull off the mouthpiece and turn the knurled airflow adjustment ring to your liking.

Then is the Aspire Nautilus AIO Kit. Designed with some key elements from the Aspire Breeze 2 and Spryte, the Nautilus was crafted for portability and traveling. Powered by an internal 1000mAh battery, it can fire up to 12W and the intuitive 3-stage LED light will indicate the battery life clearly.

As for the massive 4.5ml pod, it can be refilled via a seal plug located at the bottom of the reservoir. Heating elements you can get from the set are two 1.8ohm BVC coil heads, one for use with regular e-liquids and the other for use with nicotine salts. Both of them feature a vertical coil configuration that provides intensely concentrated flavors, yet less dense and more discreet clouds.

Related blog: A Flask Or A Pod System? | 1150mAh BOHR Flask Kit Preview

I always like collecting vape devices with unique shapes. In this article I'm gonna introduce the BOHR Flask, a flask-shaped pod system vape. Just buy from the vapesourcing online shop if you like.

BOHR Flask Kit is an aesthetic pod system with ergonomic design, the sleek Aluminum body and curved edges make it very comfortable to hold in hand. Powering the kit is a built-in 1150mAh battery, it allows the device to fire up to 20W and last a long vaping time. Assisted by the SAGA Player chip which origins from the smartphone industry, the Flask features different working modes including Wattage, Voltage and Play mode.

By pressing the adjustment button, you can effortlessly control the real-time output. And the high definition OLED screen that doubles as a fire button will show the essential vaping data clearly. As for the refillable pod, it can hold up to 2ml of your favorite e-liquids. Heating elements included in the set are a 0.4ohm Mesh coil head and a 1.2ohm Ceramic coil head, they can always meet your needs whether you like sub ohm vaping or MTL vaping. Anyway, BOHR Flask is worth your every penny.

You may also like this: buy aegis solo mod

Parameters as below
Size: 90 * 43 * 15.5mm
Capacity: 2ml
Battery: 1150mah
Wattage: 1-20W
Resistance: 0.4ohm(Mesh) / 1.2ohm(Ceramic)
Material: Aluminum + plastic

Related blog: 350mAh Vladdin RE Kit VS 250mAh SMOK SLM Kit

As a MTL vaping lover, it's my daily habit of looking for some new and worth buying devices. Lately, I found two decent pod stick kits in the vape shops near me. One is from Vladdin Co. and the other is from SMOK Vape Co. In the following, I'm gonna make a detailed introduction.

We first look at the elegant Vladdin RE Kit that features a futuristic curvy design with defined edges. Like the original Vladdin, this refillable version measures 19 x 11 x 90mm and weighs only 30g, making it very easy to carry around in the smallest of pockets. Powered by a built-in 350mAh, it has a maximum wattage of 12W to vaporize your favorite nic salts to help satisfy any cravings. The battery can be charged via the micro USB port on the bottom of the device in a short time. On the body, there is a white LED light, it illuminates as you puff and it's draw-activated, so no buttons to get confused with.

As for the pod, it can hold up to 1.5ml of e-liquid. That should be plenty for people using high-nicotine e-liquid. Internally, the ceramic coil ensures that the coil material does not burn out quickly. In addition, the Vladdin RE utilizes a convenient top filling method to prevent the accidental loss of a cartridge should it be dropped or misplaced during refill. This allows for the pod to remain connected via the strong magnetic connection.

Here we come to the SMOK SLM Kit which presents one of the slimmest and a lightweight vape pen. Leveraging the success of previous pod systems, SMOKTech crafted the SLM with a sleek and thin chassis design with streamline form factor for comfortable all-day use. Internally, SMOK has managed to integrate a 250mAh internal battery within the SLM stick, with an LED light indicator to provide instant battery life feedback and is conveniently charged via micro USB port.

Operationally, the SLM Pod System is activated by a draw-activated mechanism with a simple draw inhale, with a wattage range of 10 to 16W. The atomizer core is integrated into the 0.8mL refillable pod element, delivering a compact chamber section with elongated chimney design for a phenomenal airflow intake, catering specifically to MTL users.

Related blog: Is VOOPOO Drag Baby Kit A Better MTL Device Than Vaporesso Target Mini 2 Kit?

In this article, I'm gonna make a comparison between two MTL vape devices that take on vape box mod and tank atomizer style. One is from VOOPOO and the other is from Vaporesso.

Firstly we look at the VOOPOO Drag Baby Trio Kit which is a pocket-friendly box mod system. Formed from durable zinc-stainless steel alloy construction, it is incredibly lightweight to increase portability and maintains a whopping 1500mAh rechargeable battery within. The large capacity battery allows for all day vaping providing, there is e-liquid in the 1.8mL capacity tank that is integrated into the Baby Trio.

Featuring the PnP-M2 and PnP-C1 coils firing at 0.6 and 1.2ohm, respectively, it has a slew of new coils to call upon to create the densely flavored clouds of vapor. At the top of the tank sits a threaded top fill system, hiding two needle nose fill ports to prevent positive pressure during refills. Featuring a single button operation, the Baby Trio is controlled by the advanced GENE.TRIO Chipset, offering a rapid firing speed and intelligent cold boot mode.

Then is the Vaporesso Target Mini 2 Kit that is a reiteration of the original Target Mini but paired with the impressive VM 22 Tank equipped with a protective metal sleeve, plug 'n' play coil installation method and a 5-hole MTL style airflow. Formed from durable zinc-alloy, the kit is lightly impact resistant and features a textured grip panel to prevent unfortunate falls and drops preemptively.

Inside the housing is an OMNI Board 4.2 Chipset, which gears the kit with a comprehensive temperature control suite and allows the responsiveness of the fire rate to drop to a low 0.001s. With a wattage range between 5-50W, the Target Mini 2 can utilize the temperature control suite to output smooth soothing vapors tailored to each individual user. Paired with the 22mm diameter VM Tank, the kit makes good use of the airflow settings and works well with the coil selection, adopting the MTL-Style airflows and coil options to explore the pure flavors of complex eJuice and nicotine salt mixtures.

Related blog: Is Eleaf iStick Rim Kit Better Than OBS Cube Kit At Vapor Production?

In this article, I'm gonna introduce two decent vape mod kits. One is from Eleaf and the other is from OBS. Both of them has a maximum output of 80W, you can just make a comparison between them to see which one fits you better.

Let's start with the Eleaf iStick Rim Kit. It is an integrated battery vaping system, introducing an integrated 3000mAh rechargeable battery, wattage range that goes up to 80W, and is paired with the new MELO 5 Tank. Crafted to house a 3000mAh integrated and rechargeable battery, the iStick Rim can last the entire day, firing the atomizer and coil between the range of 0.05-3.0ohms, creating densely flavored vaporous clouds.

Featuring a wide wattage range, it is compatible with most atomizers out there and can feature plenty of protections and safeties against product failure. In addition, the iStick Rim is paired with the MELO 5 Tank, featuring a child safe sliding top fill system, silicone bumpers for the glass tank, and can utilize coils from the new EC coil Series, lending a mesh and kanthal coil option that can properly use the MTL and DTL options on the dual slotted adjustable airflow control ring.

Then is the OBS Cube Kit. It is an ergonomically designed starter kit, featuring an integrated 3000mAh rechargeable battery, near instantaneous firing speed, and is paired with the Cube Tank. The Cube is fashioned from sturdy stainless steel and zinc-alloy construction to protect the integrated 3000mAh rechargeable battery. Able to fire at up to 80W, the Cube can achieve a firing speed as low as 10ms and is incredibly responsive.

In addition, it is visually striking as it includes nearly three different finishes on the sides and face of the device, including brushed metal, shiny gloss, and a cobra lattice pattern with the "Cube" logo stylized at the center. Furthermore, the Cube mod is paired with the Cube tank which features an 810 wide-bore Delrin cone drip tip, quarter turn threaded top refill system, and access to the OBS M1 and M6 coils for fuller, better clouds.

Related blog: Which Kit Is Better For Vaping On The Go? Eleaf iTap Or SMOK INFINIX 2?

We all know that MTL vape devices with lower power are very popular among users. In the following, I'm gonna make a comparison between two such devices from SMOK and Eleaf.

Let's start with the SMOK INFINIX 2 Kit. It is the modern rendition of the original INFINUX, increasing the battery capacity to 450mAh alongside a renovated pod cartridge design for a classy everyday vape pen. Formed from durable zinc-alloy, the chassis of the INFINIX 2 houses an upgraded battery with updated multi-color LED light, increasing the capacity from 250mAh to a whopping 450mAh.

In addition, the INFINIX 2 is offered with a redesigned pod, shaping the mouthpiece to the natural contours of the lips, while integrating a 1.4ohm coil within to vaporize the selection of tasty vape flavors available on the market. Furthermore, the intricate pod design is similarly shaped to the older one with an improved airflow that caters to MTL users while maintaining high level for flavor profiles of your favorite nicotine salts.

Then is the the Eleaf iTAP Kit. It is a carefully crafted nicotine salt pod system, implementing a 0.75 and 1.6ohm coil selection and technology, refined adjustable airflow control ring, and can contain up to 2mL of juice within the food-grade plastic pod. Formed from zinc-aluminium alloy, the chassis of the iTAP is engineered to withstand moderate falls and drops, preventing damage to the integrated 800mAh rechargeable battery contained within.

In addition, the refined airflow control ring is located at the bottom of the iTap pod, formed with three airflow inlets of consecutively larger sizes to find the best airflow for each user. Furthermore, the iTap pod system can utilize coils from the Eleaf GS Air Coil System, presenting a kanthal or stainless steel coil option to create full-fledged clouds laden with densely packed flavor. When utilizing the 1.6ohm GS Air Coil, the iTap adopts a process of anti-dry burn technology, preventing dry burns, and noting times for refills.

Related blog: Is 1000mAh Lost Vape Lyra Kit Better Than 1100mAh Smoant Pasito Kit?

If you're in looking for some decent pod system kits, then you can't miss the following two devices I'm gonna introduce. One is from Lost Vape Co. and the other is from the Smoant Co.

We first look at the Lost Vape Lyra Kit. It is an ingenious vaping pod system, incorporating a 1000mAh rechargeable battery while the pod holds up to 2mL of today's popular eJuice, 3 different power levels, and can host an optional lanyard via a threaded connection. Constructed from durable zinc-aluminum alloy, the chassis of the Lyra is visually striking featuring a beautiful resin layout that is reminiscent of mosaic tiles.

On the exterior surface of the Lyra is a single firing button with LED battery life indicator ring around it, denoting the battery charge and the power level via a colored LED light. Furthermore, the Lyra Pod System utilizes coils from the Lost Vape Lyra Series, calling on a 0.6ohm mesh coil and 1.4ohm kanthal coil for DTL and MTL vaping respectively. The coils are installed beneath the mouthpiece on the pod, revealing a dual port fill system as well.

Here we come to the Smoant Pasito Kit. It integrates an advanced ANT chipset with 1100mAh battery, Five-Level Output Adjustment, and a pioneer of the first REBUILDABLE coil systems for pod devices. Boasting the advanced ANT chipset, the Pasito is marked with rapid fast response time and can output the batteries full potential even when nearly empty thanks to a powerful constant voltage output. In addition, the Output Adjustability creates a full range of output levels to suit the user and their individual preferences, equipped with 5 levels of adjustments---10W, 13W, 16W, 20W, and 25W.

The Pasito is equipped with a smart LED Indicator, showcasing the current battery state and power output. level. Furthermore, the most prominent feature of the Pasito is the first REBUILDABLE atomizer coil for a pod system (sold separately), allowing for building enthusiasts to enjoy the convenience of portable pod design. Alongside this is a pair of 0.6ohm Mesh Coil (Direct Lung) and 1.4ohm Ni80 Coil (Mouth-to-Lung) for traditional eJuice or nicotine salts, optimized to create the ultimate vape experience.

Related blog: LOOK At The Voopoo Drag Nano VS Vaporesso Aurora Play

The Voopoo Drag Nano is the first pod system kit of the Voopoo Drag series. The Drag Nano consists of a built-in 750mAh battery and 1.0ml refillable pod, with portable size and beautiful resin panel. Additionally, DRAG Nano Pod kit inherits both classic and advanced GENE Pod chips, and it gives you the best flavor and incredible vaping. Add in a brand new 1.8 ohmic coil, and the DRAG Nano is optimized for nic-salts e-juice. Get it and enjoy the happy daily vaping.

Voopoo Drag Nano Features:

Portable size with a beautiful resin panel
Inside the GENE chip is used for flavor
750mAh rechargeable battery for a long time
Evaporation of the new 1.8-ohm coil is optimized for nic-salt
Patented annotation design
Intelligent indicator
Various safety protection
A variety of colors are available

Then look at another pod kit-Vaporesso Aurora Play

Vaporesso Aurora Play Pod Kit consists of the built-in 650mAh battery and 2ml standard e-liquid capacity. Aurora Play comes with two pods with 1.3Ω and 0.65Ω, to satisfy your different vaping needs for regular juice and nic salts, coming with the advanced OMNI Board Mini chipset.

Vaporesso Aurora Play Features:

Compact lighter-shape device
Innovative PTF (Press To Fill) design
3 levels of H/M/L power
Perfect for nic salts & CBD oil
OMNI Board Mini chipset
Lateral ON/OFF button

So which one you like? Voopoo Drag Nano or Vaporesso Aurora Play? Click here Vapesourcing best online vape shop to learn more.

>>You may also need:

https://vapesourcing.com/joyetech-eroll-mac-kit.html

Today I will show one new vape box mod - Vaporesso GEN Mod which comes with soft touch casing which is made from 4 layers of coating, giving it soft rubber-like feel, yet still making it smooth to the touch. Now let’s get more information about this vape mod kit below.

Vaporesso Gen Box Mod is powered by dual 18650 batteries to make high power of max 220W output. GEN mod adopts Axon chip with an intelligent system, easy to use. Together with the pulse mode, AXON will continuously give you a hit throughout your puff (every 0.02s) - not just from the initial fire - giving you more powerful, flavorful clouds with every puff. And Vaporesso Gen maintains 0.91 inch OLED screen to display the detail vaping information.

Parameters:
Size: 93.5*27*53mm
Power Range: 5-220W
Battery: 2x18650 Batteries(Not Included)
Display: 0.91' OLED
Resistance Range: 0.03~5Ω
Charge Current: 2.5A

The best partner of Vaporesso GEN Box Mod is the Vandy Vape Kylin M RTA 24mm

The Vandy Vape Kylin M RTA is 24 mm in diameter and is designed with two rear clip shaped decks for a single mesh coil. The Kylin M RTA features a threaded top fill design with a maximum e-liquid capacity of 3ml or 4.5ml with bubble glass cans.

Spring-loaded ceramic support blocks are a key aspect of Kylin M RTA because they keep the cotton in contact with the entire mesh coil, even as the cotton flattens over time. In addition, Kylin M RTA features a leak-proof double adjustable top airflow control with honeycombed air holes to provide a satisfying smooth stretch.

Do you like this new vaping by Vaporesso Gen Box Mod and Vandy Vape Kylin M RTA? If you do you can go to Vapesourcing best online vape shop to get more details!

>>You may also like:

drag mini mod in stock

>>Read more:

Dejavu DJV D7 Mod Review: Hellvape Rebirth RTA's Best Partner

I really like the SMOK vape kits, especially their vape mod is very strong and ergonomic. It looks and feels beautiful. They are the SMOK MORPH and SMOK X-Priv, both them with a range of useful and convenient features that make it a real pleasure.

SMOK MORPH 219W Kit is a great combination of fully competent vape mod that can do everything you need. It's fairly lightweight in size, and it works well in all vape modes - including temperature control. The touchscreen display is the best I've ever used on vape mod. It responds almost immediately to touch with zero delays or lag. The chassis is strong and durable, with good weight and weight in the hands. It measures 84.5mm by 44.8mm by 30.2mm and weighs 158g.

On top of that, SMOK Morph also includes its new IQ-s vape chipset, which delivers the fastest fire time in the business - 0.001 seconds. It also adds many safety features and provides comprehensive support for temperature control atomization, overheats protection, over-discharge protection, and intelligent atomizer identification technologies.

The SMOK TF Sub Ohm tank is a lot better than SMOK’s previous releases and this is mostly down to its new mesh coil heads which come in two distinct flavors: Mesh and Ceramic.

The SMOK X-Priv 225W Kit features a 2.0-inch high-quality color display with a clear and readable updated and redesigned user interface. The display screen also provides six different colors for the user interface. The X-Priv is powered by SMOK's latest chipset, offering output from 1 to 225W with three output Settings adjusted.

The TFV12 Prince has an incredible 8.0ml capacity increase, a unique crown design, and bulbous glass tube. The TFV12 Prince is an updated version of the original TFV12 with a new super engine Prince V12 atomizer head designed to increase flavor and steam production.

Do you think the SMOK MORPH and the SMOK X-Priv are the best SMOK vape mod? If you do you can go to Chinese vape store Vapesourcing to buy them!

>>Releated product:

istick mix kit for sale

The Lost Vape Orion was one of the best pod vape last year. For many, however, the handsome pod mod with excellent vaping performance is expensive. If you, dear vaper, are one of those people who doesn't want to spend nearly $80 on a pod, then this is the right article for you!

1. Geekvape Frenzy Pod Kit

Geekvape has just launched its first pod mod or Frenzy Kit. This new portable pod is made of zinc alloy and resin. If you're not willing to spend more than $35, this might be your best bet. Let's tell you, Geekvape is offering a very good deal for that price: 950 mah built-in battery, smart AS microchip set and multiple security protections.

Frenzy Pod Kit also features visible adjustable airflow and magnetic connections. How convenient! So for all these reasons, we highly recommend that you give crazy a chance if you're looking for a pod mod like Orion without spending too much money.

2. The Trinity Alpha

If Frenzy Pod Kit doesn't Frenzy you, let's offer you a second option.SMOK was the first brand to launch Orion knockoffs: trinity alpha kit. The pod mod comes with a large capacity built-in 1000 mAh battery and comes with Mesh and MTL coils. One of the pod mod's biggest strengths is its coil compatibility with the Nord coil.
Unlike Geekvape Frenzy, SMOK Trinity Alpha has three power levels (soft/standard/hard), so you have to manually select a better Frenzy mode.

3. Orion Q, no DNA chip!

If you still like the original Lost Vape Orion, let us tell you that you can also get cheaper options from the original manufacturer. Lost Vape has now released the second version of orion q kit. You can find the pod for less than half the price, but without GO's most unique electronic feature: the Evolv DNA board.
The Orion Q's 950 mah internal battery and power output is set at 17 watts. Without adjusters, you can find devices without pods or complete kits with a single 2ml pod containing a 1.0ohm Kanthal coil.

All three are easily found in many vape stores. For an example you can find them at vapesourcing online vape shop.

Hello, guys! Today I will recommend you one new pod system kit - Sense Sidekik Kit, which looks very fashionable and modern with the SMOK NOVO, so you will enjoy a button-free vape. Now let's take a close look at this pod system kit below.

Powered by 460mAh built-in battery capacity, the Sidekik can fire between the wattages of 10-15W, adopting a draw-activated firing mechanism. Featuring a LED battery life indicator light at the base, the Sense Sidekik is recharged via micro USB port and can be charged within the hour. The pod cartridge features 2ml e-juice capacity and comes with a 1.1ohm coil which is best for nic-salts. This kit has two vape modes can be switchable: Normal and Strong mode, you can enjoy different vaping experience.

Parameters:
Dimension: 91 x 25.5 x 14.5mm
Battery capacity: Built-in 460mAh
Pod liquid capacity: 2ml
The resistance of the coil: 1.1ohm
Output wattage: 10-15W
Material: Zinc alloy, PC
Input voltage: 5v
full battery charging time: 60min
Two vape mode: Normal and Strong mode

Do you think the Sense Sidekik looks like the SMOK NOVO?

The SMOK NOVO is a luxury re-filled pod system designed with exquisite cobras plated panels. Sense Sidekik is looking very similar to SMOK NOVO. The SMOK NOVO is powered by a 450mAh rechargeable battery and the pod system has a power range of 10W to 16W. The Sense Sidekik is powered by a 460mAh battery and has about the same power as SMOK NOVO.

Both the SMOK NOVO and Sense Sidekik come with 2ml refillable pods. They all both have minimalist designs and are so portable that you can take them with you wherever you go. But SMOK NOVO has more color options. Sense Sidekik now only has three color options.

In a word, Sense Sidekik has a lot of same advantages with SMOK NOVO, if you're interested just go to Vapesourcing shop vape online to find more.

>>Related product:

drag nano for sale

The Dejavu DJV D7 Mod is a new release from the Vape reviewer Adrian Lo Dejavu. So here is what appears to be the first box mod device from Adrian and it has been apparently inspired by Rifle Arms and weapon designs. This is apparent in the color range and also the mod is made from a Military grade abrasive blasting material and polymer. Inside the mod is the Asmodus GX180 UTC chip used in mods such as the Lustro, Minikin V2 and Ultroner EOS.

As with the Asmodus mods this has an HD color touch screen operation. You get plenty of user modes including Variable Wattage, Temperature Control, and Custom Curve Modes. The maximum output is 180W using dual 18650 batteries which are not included in the kit. There are so far 3 colors shown–Army Green, Sand, and Black.

Dejavu DJV D7 Mod Specs
Size: 50x35x85mm
Battery: dual 18650 (not included)
Military grade abrasive blasting material
Resistance Range: 0.1ohm-3.0ohm
Temperature Range: 212℉-572℉/ 100℃-300℃
GX180 UTC Asmodus chip
Touchscreen HD color screen
Modes: VW, TC, Custom Curve, TCR, TFR
Output: 180W max

Here recommend you a Hellvape Rebirth RTA for the DJV D7 Mod

Rebirth RTA is a Rebirth project designed by Mikevapes and manufactured by Hellvape. This is a 25 mm RTA that can accommodate a double coil and cellular airflow system. The populate method for this born-rta is very simple, you just push and lift the top cover, and then you can populate e-juice with the populate port.

Rebirth RTA Features:

25m diameter
2ml & 5ml e-juice capacity
Push & Lift to fill method
Honeycomb airflow system
Dual coil configuration
Postless build deck
Adjustable airflow
Gold plated 510 pin

>>You may also like:

zeus x rta in stock

Guys, do you want to order one newest RTA Tank now? Today I will show you one newest vape RTA - Hugsvape Ring Lord Mesh RTA, which is really a decent atomizer for both beginners and veteran users, so do you want to have a try?

The Hugsvape Ring Lord Mesh RTA is made of high-quality Stainless Steel and glass, with 26mm diameter. Adopting unique U-shaped gold plated push mesh style wire, it can really bring out flavor thanks to a larger coil contact surface area. It also features easy top filling design and adjustable bottom airflow. There is also a bubble glass tube in the package, which supports a 5.0ml large juice capacity.

Hugsvape Ring Lord Mesh RTA Features:
1. Stainless steel and Glass construction
2. U-shaped gold plated push Mesh style wire
3. 5.0ml e-juice capacity with Top filling system
4. Adjustable bottom airflow

Another RTA to recommend you is the Oumier Wasp Nano RTA. It is also a very famous RTA. The diameter is 23mm and the capacity is 2ml. The Wasp Nano RTA uses a two-sided adjustable airflow system, providing a nice flavor to the air from the bottom to the top. Wasp Nano adopts top filling design, the detachable internal cavity, avoid leakage.

Oumier Wasp Nano RTA Features:
Size: 23 * 35mm
Capacity: 2ml
Drip irrigation head: PCTG drip head
Bilateral adjustable airflow system
Leakproof top filling design, the removable inner chamber
Support single coil deck

Do you like Hugsvape Ring Lord Mesh RTA or Oumier Wasp Nano RTA? Also, you can go to our vapesourcing cheap online vape shop to find other famous RTA!

>>You may also want:

https://vapesourcing.com/geekvape-zeus-x-rta.html

Hi, my friend, as promised, I introduce you to the second novelty, released from the pen of Steam Crave. And again, we observe a serviced tank, but our guest does not possess gigantic dimensions, therefore, and has a corresponding allowance in the title.

1. Steam Crave Aromamizer Lite RTA 23mm

According to the developers, this copy is a converted symbiosis of Aromamzer RDTA V2 and Supreme Lite. Therefore, we are not going to compare it with anything, just get to know each other.

Completion
- Aromamizer Lite RTA 23mm
- additional drip type
- key-screwdriver
- spare oring
- spare screws
- 2pc spare glass (probably)
- user manual
- sticker

Naturally, the manufacturer's corporate style could not ignore this novelty. The strict appearance of the abundance of metal, angular body - all is neat and manly. By the way, the dimensions of the tank are not so big, and in the context of this manufacturer, it is altogether tiny.

Drip type is in set two, as far as I understood, both of them are made of dolrin. They differ from each other, as they are used in different modes of vaping - MTL and restricted DTL.

Cover curled, risks are there. Beneath it, a platform lowered below the sides of the tank, with two filling holes of sufficient size. The capacity is quite small, but it can be slightly increased due to the complete glass bubble.

2. Vandy Vape Pulse X RDA

Earlier versions had a diameter of 22 and 24 mm respectively, our today's patient is Pulse X at 24 mm, which is quite a popular diameter in drip tips.

Dimensions:
Height: 33 mm;
Diameter on landing: 24 mm;
Bath depth: 2 mm.

Vandy Vape Pulse X RDA is made of stainless steel and is available in 4 color options, the drip possesses side air intake and directional blow-up for only two spirals, allows you to install 510 through a spacer and 810 drip types, equipped with an X-shaped stand in which you can install vertically or horizontally spirals, also RDA can work on bottom fighters and feed the jus on top of the spirals.

The experience of using with a metal skirt showed that drip tip conveys taste quite well. The adjustment of the blower here is slot, first overlapping the upper holes one by one, and then, if we continue the rotation with the top cap, the upper holes begin to open, and the lower row closes. Continuing the setting, you can close the entire airflow from both sides.

All right everybody? Welcome to the up close and personal with the iStick Pico Baby. This is the box that it comes in very generic looking, typical Eleaf. On the side, you got your authenticity code there and everything. On the back there, you have your contents. If you want to pause the video right now and read that, you can. And another guy from Eleaf is iStick Pico S, are they a little bit different?

Eleaf iStick Pico Baby Kit

Eleaf iStick Pico Baby Kit comes with the GS tank in 2.75 ohm coils. It has maximum output wattage of 25 watts. You get everything you normally get with all these mods here.

We’ll put the Pico to the side for a second. Beautiful green one, though. They did a nice job on that. They really did.

Pull out the foam insert. Pull out the cardboard insert and inside you have a little Baby tank vape band, some spare O rings and here is your spare coil. I have one in the tank and one spare. This is the USB cable that your received with it. Of course, you get the obligatory books and stuff like that, quick guide, user manual. We’ll file all that to the side. Let’s get this box mod to the side.

One really neat feature, I like where they put the fire button. I like the fact that they put it on top like that and it's kind of got like that mushroom shape to it. It’s got a nice feel to it. Long throw but really really nice.

The one thing that I really like a bout it is the locking feature. It has a mechanical locking feature where you simply screw it down like this and now, the mod will not fire. You can safely put it in your pocket and nothing will happen. Then to unlock it, you simply unscrew it until it doesn’t go anymore and you’re ready to fire. I think that’s kind of cool, really like that.

Eleaf iStick Pico S Kit

iStick Pico S kit, an Ello Vate tank, a 2 ohm coil head, 15 ohm coil head, USB cable, user manual with spare parts. This mod is good for a 100 watts.

Let's open her up and see what it actually looks like inside. Here we go. That is the actual mod. We're going to put that to the side for a second. Let’s go over the contents of the box. All your usual paperwork, battery warning card, coil card, tank manual, mod manual. Here are your usual spares, gaskets, O-rings, stuff like that.

Now, if you look at the tank, you see this little arrow right here. See that? That's where you push in order to access your top fill. There’s a little flap here so just in case the vape tank opens up in your pocket, the most of the liquid will stay in the tank. Good job with that. No problems with filling it except with bullnose bottles. They can get a little messy.